|
No |
Spare part (unit) |
Specification |
Notes |
|
1 |
Bioreactor tank (1) |
50x25x30cm |
|
|
2 |
Feed tank (1) |
- |
It can be any used tank in volume of 30-40 liters |
|
3 |
Level control tank (1) |
- |
It can be any used tank in volume of 3-4 liters |
|
4 |
Feed pump (1) |
Circulation pump to level control tank |
|
|
5 |
Air pump (1) |
Maximum flow rate 550 l/h |
|
|
6 |
Air diffuser (5 unit) |
Bubble size 100-500 µm |
|
|
7 |
Air flow meter (1) |
- |
|
|
8 |
Submerged membrane module (depend on requirement) |
|
Prepared by us |
|
9 |
Vacuum pump (1) |
|
The purchasing is in progress |
|
10 |
Centrifugal pump (1) |
|
The purchasing is in progress |
|
11 |
Pressure gauge (3) |
|
The purchasing is in progress |
|
12 |
Valve (5) |
|
|
|
13 |
Pipe line (depend on requirement) |
|
|
|
14 |
Cross flow membrane module |
|
Prepared by us |
Price was taken by direct survey to: De Servis Leuven bvba, Diestsstraat 133 – 3000 Leuven
Instrumentation and analysis
|
Parameters |
|
|
*MLSS |
- |
|
*COD |
- |
|
*Turbidity |
- |
|
pH |
|
|
Temperature |
|
|
Dissolved oxygen (DO) |
|
|
Oxidation-reduction potential (ORP) |
|
|
pH controller |
|
|
Temperature controller |
|
|
Flux |
- |
Remarks:
- These is basic instrumentation to operate the activated sludge system or membrane bioreactor. The more instrumentation analysis are required for more detail observation.
- The other parametersthat could be required to be tested are, NO-2 -N, NO-3 –N, total phospor (TP) and total nitrogen (TN).
- The detail can be found and standard method for wastewates analysis.
The operating parameters is determined according to the pilot plant parameters from MBR companies.
来源：http://membranebioreactor.blogspot.com/2008/11/lab-scale-mbr.html
